HomeServicesQualityCapabilitiesEquipmentContact Us  

Equipment

 
  • 1 - 2006 Haas Tool Room Mill TM2
    -Great for production runs and single piece prototype work.
    -Work piece 16'' x 16'' x 30''
  • 1 - 2005 Charmilles Roboform 23 EDM Sinker Machine
    -Endless capabilities for machining. 
    -Tight tolerance and great finishes, any design.
  • 1 - 2002 Charmilles HD20 Hole Popper.
    -Used for small diameter holes, materials that would cause a drill to lead off, removal of tooling in existing part, and holds tight tolerances with good finishes
  • 1 - 1996 Charmilles Robofil 290 Automatic Wirefeed Wire EDM with Auto Restart
    -CAM-CT Programming System, CT300 Tooling, Extended Filtration, 2-Ton Chiller
  • 2 - 2001 Fadal VM3016L
  • 4 - 1996 Fadal VMC15XT CNC Vertical Machining Center --With a 30 x 16 x 20" Machining capability and Automatic Tool Changer
  • 1 - 1993 Fadal VMC15 CNC Vertical Machining Center
    -With a 20 x 16 x 20" Machining capability and Automatic Tool Changer
  • 1 - 1992 Fadal 4020HT CNC Vertical Machining Center
    -    With a 40 x 20 x 20" Machining capability and Automatic Tool Changer
  • 1 - 1998 Hardinge Cobra 42 CNC Lathe
  • 1 - 1991 Okuma LB15 CNC Lathe
    -    With 2-Axis, 12 Tool Turret
  • 1 - 1988 Doall CNC-2000 3-Axis Milling Machine
    -With a Dynapath System 10
  • 1 - 1996 Bridgeport Vertical Mill
    -With a 48-inch Table and a Digital Readout
  • 6 - 1982 Bridgeport Vertical Mill
    -With 48-inch Table and Digital Readout
  • 1 - 1988 K.O. Lee Model B-2060 Universal Grinder
    -With I.D. and O.D. capacity of 8 1/4" with 32" between centers
  • 1 - 1997 Chevalier Model 6U-1424A Cylindrical 14 x 24" OD/ID Grinder
    -With Sony Digital Readout System (.000050 Resolution)
  • 1 - 1982 Harig 6 x 18" Surface Grinder.
  • 1 - 1994 17 x 67" Kingston Lathe HJ1703
    -With Spindle Bore 2 1/4" and a Digital Readout
  • 1 - 1987 17 x 42" Kingston Lathe
    -With Spindle Bore 2" and a Digital Readout
  • 1 - 1983 17 x 60" Summit Lathe
    -With spindle Bore 3", Gap Length 15 3/8", Swing over gap 27"
  • 1 - 1981 14 x 32" Yuasa Lathe
    -With a Digital Readout
  • 1300 AMP Heli-Arc Welder
  • 1 - Horizontal - Vertical Doall Band Saw
  • 24" 3HP Grb Vertical Band Saw
  • 1 - Sunnen Honing Machine
  • 1 - Cress Heat Treat Furnace
    - 12 x 20 x 8"
  • 1 - 2002 Chevalier Model FSG-3A818 - 8 x 18 Hydraulic Surface Grinder


      * Our EDM, NC Lathe and NC Mills are accompanied by a
        Smart Cam System for Off-line Programming.

Back to Top